Construction Reinforcement Products

  TDS Technical Document Sheet   

  CE Document   

Product Description
It is a special mortar prepared for historical buildings without cement. it is a plaster, mortar that provides breathability and has a high water vapor permeability.

Areas of Usage
• Stone and brick wall weaving,
• Restoration or strengthening of historic masonry structures,
• Repair works for cracks of domes and vaults,
• it is used in stone, brick and wall knitted works of existing historical structures.
• it is used asa binder in the preparation of Khorasan mortar for grouting production.

Features and Benefits
• Easy to implement.
• Cement-free.
• High bond strength.
• Breathable, high watervapor permeability.
• it allows the production of mortar in different properties compatible with historical texture.
• it is cooked with conventional methods at low temperatures.

Application lnstructions
Surface Ouality: Surfaces should be clean, smooth, free from all kinds of dust, oil, dirt, rust, mould oil, detergents, etc. Weak Parts on the surface should be removed.

Surface Preparation: it should be noted that the surfaces to be repaired and plastered in historic masonry structures should be solid, dust-free and clean. AII kinds of oils, rust, etc. that weaken the surface, adherence, it should be cleaned thoroughly. Application of the surface of the wall should be dampened in advance to improve the adhesion and the time of the mortar. lf there is a flow of water on the surface, it should be elosed with the help of an appropriate Plug and the water should be drained.

Mixing: the required amount of water is put in a elean mixing bueket with the help of scale and the TEKNOREP 500 is added slowly and mixed with a 400-500 cycle mixer for about 4 minutes.

Application Notes / Restrictions
• in outdoor applications, the sun should be protected from rain and frost for the first 3 hours.
• Reaction times are affected by ambient and ground temperatures. The reaction times are shortened in the hot place and the cold place is prolonged.
• Warm water should be used in eold places.
• leed mixture water should be used in hot places.
• During the application of the product, work clothes must be worn and appropriate glasses and masks must be worn in accordance with the occupational health and safety regulations.
• After application, it should be protected against adverse weather conditions such as direct sunlight, severe wind, high air temperature (above 35°C), rain and frost. The product should be cleaned with water and detergent before it gets cured.
lmmediately after application, equipment should be cleaned with water before curing. After the product has hardened, it should be cleaned by mechanical methods.
• Prepared mortar is easily applied with a trowel. For more than one coat application, it should be done after the previous hardener. Precautions should be taken against rapid drying in open area and wide surface applications.