CATEGORIES
SHEETS CAN DOWNLOAD HERE TSE DOCUMENT
DID YOU SEE? CE DOCUMENT
DID YOU SEE? OUR CATALOG YOU CAN
DOWNLOAD AS PDF
- Tile Adhesives and Joint Fillers Fuga
- Repair Mortars and Grouts
- Thermal Insulation Products
- Industrial Flooring Products
- Granito Microbeton
- Tekno Stone Carpet
- Restoration Products
- Waterproofing Products
- Concrete Admixtures
- Construction Reinforcement Products
- Construction Chemicals General List
SHEETS CAN DOWNLOAD HERE TSE DOCUMENT
DID YOU SEE? CE DOCUMENT
DID YOU SEE? OUR CATALOG YOU CAN
DOWNLOAD AS PDF
Tekno LV 100
One-component, synthetic polymer additive, special for thick applications with increased adhesion strength is a formulated self-leveling floor leveling mortar.
TDS Technical Document Sheet
One-component, synthetic polymer additive, special for thick applications with increased adhesion strength is a formulated self-leveling floor leveling mortar.
Areas of Usage
Indoor and outdoor tiles, ceramics, granite ceramics, marble, natural granite, parquet, PVC and It is used as a leveling screed under materials such as carpets.
Features and Benefits
• Self-leveling and quick-freezing.
• Resistant to furniture and wheelchair loads.
• No cracking and excellent adhesion even at very thin thicknesses.
• Can be used on floors with underfloor heating.
• Easy to apply.
Application Instructions
Surfaces are clean, smooth, solid, all kinds of dust, oil, dirt, rust, mold oil, detergent and similar adhesionfree from obstructions and debris. Surfaces must be level, weak partsmust be removed. If there is a crack or cavity on the floor or wall to be applied, appropriate TEKNOREP repairshould be repaired with mortars. TEKNO LV 100 application should be started after 3-4 days. Surfacepits should be repaired with TEKNOREP. The surface must be free of oil, dirt and rust. Dry surfacesshould be slightly moistened but no puddles should be left. Absorbent for better adherence before applicationTEKNOLATEX 500 should be used on surfaces and TEKNOLATEX 300 should be used on glossy surfaces.
Spread the prepared material on the primed floor. A spiked roller can be used to eliminate air bubbles on the surface. If the primer is not used, the smoothness on the surface will not be achieved to the desired extent. After the application is completed, it should not be exposed to strong winds and frost. Therefore, protection measures should be taken.
TEKNO LV 100 is one component. It is recommended to use a low speed drill and mixer bit to ensure homogeneous mixing. Add 4.0 - 4.3 liters of water into the bucket, then add the powder material slowly and continue mixing until a homogeneous mixture is obtained. The amount of mixing water may vary depending on the ambient temperature. Fully mixed material, depending on the ambient temperatureIt should be spread and leveled in 30 minutes.
Application Method / Equipment: Hedgehog roller, mechanical mixer, notched trowel and clean buckets.