Industrial Flooring Products

  TDS Technical Document Sheet   

  CE Document   

Product Description
Acrylic resin based, one componnet road marker and floor covering paint

Areas of Usage
• Highways, main and cross urban roads,
• Airports, bridge
• Residential buildings, shopping centers
• On urban furniture such as parquet stone, curb
• it is applied on asphalt or concrete in all kinds of engineering works.

Features and Benefits
• One-component, easy applicable
• Cold application.
• Rapid curing
• Cures rapidly in thick application
• High abrasion resistance
• High UV resistance
• The color does not change on the asphalt
• Can also be seen in the dark.

Application lnstructions
Surface Quality: The surface should be strong and cleaned from a I kinds of loose tools, and all kinds of materials that prevent to adhere. Pull-of strength at least 1.5 N/mm2

Surface Preparation: lf there are cavities on the concrete and asphalt to be applied, they should berepaired. The blocks that disrupt surface smoothness, such as level by mechanical methods. protrusion, should be brought to same The paint should be mixed well before using it. Application is made in single layer. lf second coat is applied, it should be waited for at least 1 hour. TEKNOBOND 950 is air-cured, no further action is needed.

Application Notes / Restrictions
• The paint should never be drained into sewers and water tunnels.
• After partial use, the package should be tightly closed.
• it should not be applied in the rain. The product should not be distributed with water. Newly applied material shouldbeprotectedagainsttheweatherconditionsuntilitfinishestohardening.
• it is applied by brush, roller or special ruler.
• After application, the product should be protected against direct sunlight, strong wind, high air temperature (above +35 °C), bad weather conditions such as rain and freeze.
• Because it is inflammable material, keep it away from light source also. Do not smoke.
• Because that hardening will be completed shortly after the application, cleaning should only be made with mechanical equipment. The hands should be washed with warm water and soap.
• lmmediately after application , the equipment should be cleaned with Tekno Thinner before it becomes hard