Industrial Flooring Products

  TDS Technical Document Sheet   

  CE Document   

Product Description
Acrylic based, high-performance, dusting avoiding, multi-purpose concrete varnish, insulation and protection material.

Areas of Usage
• To protect concrete and other cement surfaces on buildings and their infrastructures,
• For grounds and walls with bright appearance demand,
• in orderto increase service life of concrete, aggregate,
• To freshen up bright, colorless and surface which is ready to use for concrete surfaces with apparent
• Surface with applied surface hardening,
• On screed concrete,
• Concrete pouring in hot climates.

Features and Benefits
• it avoids dusting as it increase wearing resistance of surface.
• it is easy to applys being one-component.
• it helps concrete to be resistant against chlorine.
• it is very fast to dry because solvent within disappears very fast.
• As water increases impermeability, it avoids cracks to form in plasters asa result of freezing.
• it is used as polish thanks to bright film layer it formed.
• it protects concrete against atmospheric effects penetrating as salt or gases into concrete.
• it decreases showing the dirt and color of the concrete doesnt change by the effect of the rain.
• it has high resistance against UV.

Application lnstructions
Surface has to be cleaned from any kinds of materials avoiding to stick and dust, dirt and oil. Exposed concrete in open spaces without concrete should be cleared of lost particles and surface should be solid and dry before the application. Convenient surface preparation methods should be cleaning with vapor, high- pressure water jet or by roughening.

TEKNOCILA 350 is ready to use. Mix the package well before application. it can be applied by brush or roll with short pile manually or by automatic spraying machines. Dont apply when raining is expected. Resolving salt or se water lea s may cause loss of brightness or color change. it doesnt required a special cure treatment, it should only be protected from rain by approximately
+20 °C and for at least 1 hour (it becomes resistant to dust in 30 minutes).

Application Notes / Restrictions
• lmmediately after the application, before getting firm; equipment should be cleaned with TEKNOTHINNER.
• lmmediately after the application, used equipment and places contacting with the skin should be cleaned with warm water and detergent.
• Product may irritate the skin. Protective gloves and goggles should be used. Protective cream may be applied to hand before starting work. in case of contacting mortar with eye, it should be washed with warm water immediately and medical support should be sought
• As material includes, solvent, it should be avoided to contact with skin and eye, it should be washed with plenty of water in case of contact and medical support should be sought. Protective gloves and goggles should be used and material shouldnt be inhaled.
• As it is a burnable material including solvent, smoking should definitely be forbidden and any fire source such as welding, cutting machines should be kept away.
• lmplementer should be rested fora certain period in open area approximately every 30 minutes in application carried out in closed spaces.