Industrial Flooring Products

  TDS Technical Document Sheet   

Product Description
TEKNOSER SODIUM is a low viscosity lithium silicate based liquid surface hardener.

Areas of Usage
TEKNOSER SODIUM isusedto permanently hardenall cement based surfaces, forexample:
Production areas, Storage areas, Cold storage areas, Outdoor and indoor parking grounds, Airplane hangars, heliport, Quays

Features and Benefits
•TEKNOSER SODIUM, penetrates deeply into the concrete or screed surface and createscrystals that insoluble inpores. Onsurfaces whereTEKNOSER SODIUMisapplied;
•Water absorption decreases.
•Hardness increases over time and remains constant ,
•Frictional strength increases continuously,
•Certain dust free isprovided,
•Consists of brightness and vibrant color,
•Cracking isprevented,
•Wearing isprevented,
•Damages caused by freezing are prevented,
•Water vaporpasses.
•There isno need for another floorcovering.

Application lnstructions
The surfaces to be applied to TEKNOSER SODIUMshould be dry ormat damp, hard, strong andnot water holes. Dust, plaster residual, oil, tire track, such as paint residuals separator and adherence should be free from elements preventing. A chemical process (vapor barrier) must not be applied. Fresh concrete does not need surface preparation. it should be pressed on it and there should be no water layer on it. Vapor barrier cannot be applied before TEKNOSER SODIUM application . TEKNOSER SODIUM is used in a method suitable for the Surface Condition (for example, broom, vacuumcleaner, brush, pressure water, ete.) should be cleaned.
Also, the surfacemust be suitable forthe following requirements: Concrete Quality:min.C20/25
Screed Quality: min. EN 13813 CT-C25-F4
Application Method / Equipment: TEKNOSER SODIUM is applied to fresh concrete or screed through core spray system. TEKNOSER SODIUM is applied on a single layer equal to the surface and to fiil the pores. The sprayedmaterial isevenly distributed to the surface with athin fiber brush or a tyre trowel.Becareful not to accumulation on the surface. Appliedmaterial is left to dry.

Application Notes / Restrictions
•During application at high temperatures, the floor must be fully saturated with water.TEKNOSER SODIUM application should be donewhile the ground ismoist, but there should notbe puddles of water.
•TEKNOSER SODIUMcannot beapplied to frozen, dirty or wet surfaces.
•A small amount of color differences can occur due to different absorption degrees of theground.
•Acidic cleaning materials should not be used.
•Regularly cleaning ofthe surface increases the brightness.
•lnstantly brightness are provided to polish the surface.
•Outlay depending on smoothness and absorbency of the application surface. Tools andmaterials used inthe application should be washed withwater immediately after using.