CATEGORIES
SHEETS CAN DOWNLOAD HERE TSE DOCUMENT
DID YOU SEE? CE DOCUMENT
DID YOU SEE? OUR CATALOG YOU CAN
DOWNLOAD AS PDF
- Tile Adhesives and Joint Fillers Fuga
- Repair Mortars and Grouts
- Thermal Insulation Products
- Industrial Flooring Products
- Granito Microbeton
- Tekno Stone Carpet
- Restoration Products
- Waterproofing Products
- Concrete Admixtures
- Construction Reinforcement Products
- Construction Chemicals General List
SHEETS CAN DOWNLOAD HERE TSE DOCUMENT
DID YOU SEE? CE DOCUMENT
DID YOU SEE? OUR CATALOG YOU CAN
DOWNLOAD AS PDF
Teknobond 960 Asphalt and Concrete Coating Paint
Asphalt and Concrete Coating Paint
TDS Technical Document Sheet
CE Document
Synthetic resin based, cold road line paint with solvent.
Areas of Usage
• Highways, main and cross urban roads,
• Airports, bridge
• Residential buildings, shopping centers
• On urban furniture such as parquet stone, curb
• it is applied on asphalt or concrete in all kinds of engineering works.
Features and Benefits
• Cold application
• High covering specification
• One component, easy applicable
• Cures rapidly in thick application.
• High abrasion resistance
• High UV resistance
• The color does not change on the asphalt.
• Can also be seen in the dark.
Application lnstructions
Surface Ouality: he surface should be strong and cleaned from all kinds of loose tools, and all kinds of materials that prevent to adhere. Pull-of strength at least 1.5 N/mm2.
Surface Preparation: lf there are cavities on the concrete and asphalt to be applied, they should be repaired. The blocks that disrupt surface smoothness, such as protrusion, should be brought to same level by mechanical methods or manually.
The paint should be mixed well before using it. Application is made in sin le layer. lf second coat is applied, it should be waited for at least 1 hour. TEKNOBOND 960 is air-cured, no further action is needed.
Application Notes / Restrictions
• The paint should never be drained into sewers and water tunnels.
• After partial use the
• package should be tightly closed.
• it should not be applied in the rain and should not be diluted with water. lf required, it can be diluted with TEKNO Thinner at the rate of 5-8% and it can be applied with special pistol by spraying. Wait at least 15 minutes between the coats.
• it is applied by brush, roller or mechanical spraying methods.
• Because it is inflammable material, keep it away from lighter materials. Do not smoke.
• Because that hardening will be completed shortly after the application, cleaning should only be made with mechanical equipment. The hands should be washed with warm water and soap.