TDS Technical Document Sheet
|
Product Description It is a water based, oil based mold release which is used for the easy removal of wooden molds before concrete casting and for obtaining smooth surface concrete.
Areas of Usage• it' s used especially in smooth molds with low absorbency or absorptive molds,
• in wooden mold,
• When it is desired to increase mold productivity,
• in accelerating the mold workmanship.
Features and Benefits• it doesn't damage concrete and molds.
• it doesn't cause deterioration on the surfaces, dust on molds.
• it is not affected by cold and heat.
• it can be applied by brush and spray.
• it does not leave waste and color in mold and concrete.
• it helps to protect the concrete as well as to help extend the life of the mold.
Application lnstructionsThe surfaces must be clean, smooth, solid, free from any antiadhesive substance such as dust, oil, dirt, rust, mold oil, detergent and waste. Weak parts should be removed. Surface should be dry.
lf there are binding wires, cement bag paper, wood parts, ete., they must be cleaned. There should be no water accumulation on the surface. Before the iron covering, masonry should be preferred and it should be ready for use on the construction site.
Mix with a low-speed mixer in a clean container, free of any obstructive material, or in its package for a short time. Application can be done by roller, brush, spray. TEKNOIL W should be applied in a thin layer, homogeneously. No oil ponding should occur on the mold. The oil ponds should be removed with sponge, cloth, ete.
Application Notes / Restrictions• Second layer can be applied on very absorbent surfaces.
• Newly applied mold surfaces must be protected from rain before concrete casting.
• New wooden molds may need to be greased 2-3 times with the reason that the wood is hollow before the first use.
• The product may be irritating to the skin; work clothes, protective gloves, masks and glasses must be used. Protective cream can also be applied before starting work. in case of grout contact with eyes, eyes should be washed immediately with warm water and consult a doctor.
• Do not add foreign substances.
• Pretesting is recommended for different applications .
• it must be protected after application against adverse weather conditions such as direct sunlight, high air temperature (above +35 °C), rain and frost. The areas of contact with the skin and hands should be cleaned with water.