CATEGORIES
SHEETS CAN DOWNLOAD HERE TSE DOCUMENT
DID YOU SEE? CE DOCUMENT
DID YOU SEE? OUR CATALOG YOU CAN
DOWNLOAD AS PDF
- Tile Adhesives and Joint Fillers Fuga
- Repair Mortars and Grouts
- Thermal Insulation Products
- Industrial Flooring Products
- Granito Microbeton
- Tekno Stone Carpet
- Restoration Products
- Waterproofing Products
- Concrete Admixtures
- Construction Reinforcement Products
- Construction Chemicals General List
SHEETS CAN DOWNLOAD HERE TSE DOCUMENT
DID YOU SEE? CE DOCUMENT
DID YOU SEE? OUR CATALOG YOU CAN
DOWNLOAD AS PDF
Teknolatex 100 Multipurpose Primer
Multipurpose Primer
TDS Technical Document Sheet
CE Document
One-component, multi-purpose, acrylic copolymer-based dispersion for priming concrete or mortar surfaces prior to mortar application.
Areas of Usage
• lts used asa primer before self-levelling application
• Asa primer before ceramic and tile application
• Especially before the self-levelling TEKNOSELF applications,
• Asa primer for cement based boards, gypsum based panels and concrete panels.
Features and Benefits
• Effectively closes concrete surfaces in a single step, economically by preventing air bubbles in
• Self-levelling and water loss into the surface.
• Useful for indoor and outdoor areas and humid areas.
• Solventfree.
• Odorles.
• Chlorine-free, it does not damage the reinforcement.
• Easyto use.
Application lnstructions
Surface should be solid, free of loose and weak parts, free from freezing, foreign materials and other pollutants such as cement grout, accumulated water, oil, grease, paraffin, coatings ete. must be removed and cleaned. The surface should be prepared by suitable mechanical preparation techniques such as high pressure water or abrasive equipment. AII dust, loose and easily crumbly materials should be removed completely by brush and / or vacuum before application. Before application of TEKNOLATEX100, the surface can be damped to the saturation level of water.
Mix with a low-speed mixer in a clean container, free of any antiadhesive material, or in its package for at least 3 minutes. Applyto the surface by brush, roller and spray.
Application Notes / Restrictions
• it must be protected after application against adverse weather conditions such as direct sunlight, high air temperature (above +35 °C), rain and frost. The product should be cleaned thoroughly with water and detergent before it is fully cured and hardened.
• lmmediately after application, before hardened, the equipment should be cleaned with water. After the product is hardened, it should be cleaned by mechanical methods .
• The product may be irritating to the skin; work clothes, protective gloves, masks and glasses must be used. Protective cream can also be applied before starting work. in case of grout contact with eyes, eyes should be washed immediately with warm water and consult a doctor.
• Do not add foreign substances.
• Pretesting is recommended for different applications.