CATEGORIES
SHEETS CAN DOWNLOAD HERE TSE DOCUMENT
DID YOU SEE? CE DOCUMENT
DID YOU SEE? OUR CATALOG YOU CAN
DOWNLOAD AS PDF
- Tile Adhesives and Joint Fillers Fuga
- Repair Mortars and Grouts
- Thermal Insulation Products
- Industrial Flooring Products
- Granito Microbeton
- Tekno Stone Carpet
- Restoration Products
- Waterproofing Products
- Concrete Admixtures
- Construction Reinforcement Products
- Construction Chemicals General List
SHEETS CAN DOWNLOAD HERE TSE DOCUMENT
DID YOU SEE? CE DOCUMENT
DID YOU SEE? OUR CATALOG YOU CAN
DOWNLOAD AS PDF
Teknolatex 400 Primer for Decorative Plaster
Primer for Decorative Plaster
TDS Technical Document Sheet
CE Document
Acrylic emulsion based single component, decorative coating and multi-purpose primer with high adhesion strength.
Areas of Usage
Before applying decorative coating in Thermal lnsulation systems, it is used as primer in interior and exterior facades.
Features and Benefits
• Readyto use,
• Easy and fast to apply.
• Water based, odorless,
• it can be used safely in outdoor and indoors.
• High adhesion strength.
• High closure capability. Hardens the application surface.
• it is applied before cement and gypsum based coatings to prevent rapid water loss in mortar.
• Facilitates patterning during decorative coating application.
• it has high water impermeability due to the special polymers it contains.
Application lnstructions
Surface Quality: Surface should be solid, free of loose and weak parts, free from freezing, foreign materials and other pollutants such as cement grout, accumulated water, oil, grease, paraffin, coatings ete. must be removed and cleaned
Surface Preparation: The surface should be prepared by suitable mechanical preparation techniques such as high pressure water or abrasive equipment. AII du st, loose and easily crumbly materials should be removed completely by brush and / or vacuum before application. Surface should be dry.
Mixing: Mix with a low-speed mixer in a clean container, free of any obstructive material, or in its package for at least 3 minutes..
Apply to the surface by brush, roller and spray.
Application Notes / Restrictions
• it must be protected after application against adverse weather conditions such as direct sunlight, high air temperature (above +35 °C), rain and frost. Hands should be cleaned thoroughly with water and detergent before the product is fully cured and hardened.
• The product may be irritating to the skin. Work clothes, protective gloves, masks and glasses must be used. Protective cream can also be applied before starting work. in case of grout contact with eyes, eyes should be washed immediately with warm water and consult a doctor.
• Do not add foreign substances.
• Pretesting is recommended for different applications.
• Care must be taken to ensure that the application surface is cured..
• lmmediately after application, before hardened, the equipment should be cleaned with water.