TDS Technical Document Sheet
CE Document
|
Product DescriptionIt is a white surface protection which is water based, high-performance, acrylic based and doesnt disappear on surface and specially developed as last layer varnish material for transparent, mineral surfaces.
Areas of Usage• On concrete surfaces such as self-leveling required to be protected against water,
• As protection on some decorative ground and wall coatings such as marble effect.
• As an alternative on places where wet effect given by concrete polishes with solvent are not demanded.
Features and Benefits• it prolongs service life of cement based coatings.
• it is water-resistant.
• it is resistant against many stains and chemicals.
• it doesnt prevent transition of water vapor.
• it increases wearing resistance of the surface and prevents dusting.
• it is easy to apply because of being one-component.
• it doesnt involve solvent within.
• it is used as polish thanks to semi-lustrous film layer it formed.
• it reduces to show the dirt and color of the concrete doesnt change by the effect of the rain.
• Cleaning can be made by water after the application as product is water-based.
Application lnstructionsTEKNOCILA 400 (polishing) which is ready to use is applied on surfaces which completed cure and rubbed down with the help of brush, roll, sponge or spraying machines as 2 layers. Shake the product before use! Application tools should be washed with water immediately after the use. Temperature of the environment and surface to apply should be minimum +5°C during the application and following 24 hours.
Application Notes / Restrictions• Product may irritate the skin. Protective gloves and goggles should be used. Protective cream may be applied to hand before starting work.
• in case of contacting with eyes, eyes should be washed with warm water immediately and medical support should be sought.
• More layers should be applied to protect excessive absorber surfaces against water.
• Brightness of surface will increase as long as amount of consumption increases.
• More layers should be applied for water resistance.
• More layers should be applied for water resistance in applications made by excessive dilution.