Thermal Insulation Products

  TDS Technical Document Sheet   

  CE Document   

Product Description
it is acrylic based, in flexible structure, external wall skim coat.

Areas of Usage
• For grading the aerated concrete elements having all kinds of surface defects
• On all kinds of industrial reinforced concrete constructions,
• On civil engineering constructions such as metro, highway and dams,
• For repair, mending and reinforcement projects,
• For repair of prefabricate elements.

Features and Benefits
• it is mixed with water.
• it provides smooth surface finish.
• it hasa perfect adherence on concrete and plastered surfaces.
• it generates a crack-free appearance on large surfaces.
• Primer is not required and it is easy to apply.

Application lnstructions
Surface Ouality: The surfaces must be clean, smooth, solid and free of substances and residuals preventing adhesion such as all kinds of dust, grease, rust, molding oil, and detergents, ete. The weak parts must be removed. The cement slurry and weakened parts should be removed, and there must not be materials such as grease, dirt and rust on the surface. The absorptive surfaces should bewetted in advance, but there must not be plash and waterdrops remaining.

Surface and Ambient Temperature: +5 °C - +35°C

Mixing: External Wall Putty is ready for use. The surface must be dust, dirt and grease-free, the roughened areas must be scratched thoroughly, and the surface must be dry before the application. Please continue to stir by using a mixer attached to a low-speed drill bit until obtaining a homogenous mixture (app. 5 min.). Apply the putty that became ready for application to the surface with spatula or steel trowel. After the first layer is dried and hardened completely (24 hours), then the second layer is applied (it is recommended to apply in 1 mm thickness for each).

During the application, care must be given to the ambient and surface temperature as to be between
+5°C and +30°C. Do not apply in strong wing and under direct sunlight. Used tools should be cleaned with water after the application finishes. in case the application shall be made at air temperatures above +30°C, the application should be made on shaded faces, and it is not recommended to make application between 10:00 and 15:00.

Equipment: The prepared mortar is applied by steel trowel on the surface using scratching method. Then, the required amountfor grading is applied on.

Consumption: 1,50 kg/m2 per 1 mm thickness. Consumption may change depending on the surface and workmanship.

Application Notes / Restrictions
• it should be protected against sun, rain and frost for the first 3 hours for outdoor space applications.
• Working cloths in compliance to labor and worker healthy rules should be worn and appropriate goggles and masks should be used during the application of the product.