Waterproofing Products

  TDS Technical Document Sheet   

  CE Document   

Product Description
it is a two component, solvent free, polyurethane based waterproofing material that maintains its continuous elastic structure. 

Areas of Usage 
• in terrace, roof, balcony and creek,
• in flowerpot insulation,
• in foundation and curtain water insulation,
• it can be used safely on reinforced concrete and sheet metal.

Features and Benefits 
• Creates a crack bridge.
• Maintains high elasticity even at low temperatures.
• Easy to apply(byroller, brush or spray).
• it provides excellent adhesion even on difficult surfaces.
• it shows high resistance to the smiley water pass.
• it is resistant to salts, bases, diluted acids and dilute sulphates.

Application lnstructions 
Surface Quality: The surfaces must be clean, smooth, solid, free from any antiadhesive substance such as dust, oil, dirt, rust, mold oil, detergent and waste. lf there is segregation in concrete, it should be discarded and loose parts should be removed, weak parts should be removed. lf there is crack, hollow on the floor or wall to be applied, it should be repaired with appropriate TEKNOREP repair mortars. TEKNOBOND 500 P Flex should be applied at least 7 days later.

Surface Preparation: lf there is dilatation of the structure before applying TEKNOBOND 500 P Flex, it is firstly necessary to isolate the dilatation using TEKNOMER Champer Tapes and TEKNOMER 400D. Later isolation of dilatations is more difficult and costly. AII overheads and grooves, straps must be insulated using beveled bands. The surface to be insulated must be dry. Water puddles should be removed if there is pond watering. The concrete should be applied as a primer with a two component, epoxy-based TEKNOBOND 300 brush or roller in the range of 200 - 400 grams / m2• Primer consumption varies according to the quality and absorption of the concrete. Make sure that the primer is absolutely hardened before it is fully cured. it should be waited for at least 4 hours and at most 48 hours for the water insulation to be done on it.

Mixing: Mix TEKNOBOND 500 P Flex with A compound in a clean container or its own container which is free from any kinci of material that prevents adhesion and B Component is added on it. The product is mixed with a low speed mixer until a homogeneous mixture without lumps is obtained. Mixing time should be minimum 3 min.
The mixture is applied to the surface with finished, ready to use product, hard bristle brush or spraying machine. After the material completes the reaction, 2. coat application is made in the perpendicular direction of the first coat application. The waiting time between coats is at least 5 hours, and after the first coat has been applied, it can be passed to the other coats when there is no mark on the fingers in the manual control. lf desired, it can be used as carrier glass fiber, reinforcement throughout the floors.

Since the product does not have UV resistance, it is absolutely necessary to use heat insulation plates, protection plates, geotextile felt, should be covered with.