CATEGORIES
SHEETS CAN DOWNLOAD HERE TSE DOCUMENT
DID YOU SEE? CE DOCUMENT
DID YOU SEE? OUR CATALOG YOU CAN
DOWNLOAD AS PDF
- Tile Adhesives and Joint Fillers Fuga
- Repair Mortars and Grouts
- Thermal Insulation Products
- Industrial Flooring Products
- Granito Microbeton
- Restoration Products
- Tekno Stone Carpet
- Waterproofing Products
- Concrete Admixtures
- Construction Reinforcement Products
- Construction Chemicals General List
SHEETS CAN DOWNLOAD HERE TSE DOCUMENT
DID YOU SEE? CE DOCUMENT
DID YOU SEE? OUR CATALOG YOU CAN
DOWNLOAD AS PDF
Teknobond 660 1K S PU Transparent Coating
One component, high UV resistant aliphatic polyurethane topcoat. it is cured by moisture in the air and adheres to the applied surface continuously to form a transparent, flexible and durable film.
TDS Technical Document Sheet
CE Document
Product Description
One component, high UV resistant aliphatic polyurethane topcoat. it is cured by moisture in the air and adheres to the applied surface continuously to form a transparent, flexible and durable film.
Areas of Usage
• Surfaces that require high wear resistance,
• Where industrial or pedestrian traffic is intensive,
• Water storage, swimming and ornamental pools,
• Carpets and natural stones such as marble, ceramic,
• Wet spaces such as bathroom, wc, balcony,
• Patio, terraces and facades of buildings.
Features and Benefits
• When exposed to sunlight due to its aliphatic structure, the color protects it, does not fade, it does not yellow.
• it has excellent mechanical and chemical properties.
• High UV resistant
• it creates a monolithic film that , when applied, does not cause seams or leaks.
• Maintain mechanical properties at temperatures between - 40°C and + 80°C.
• it provides very good adhesion even on difficult surfaces.
Application lnstructions
The surfaces to be applied must be dry and clean. Concrete and mold debris mechanically; oil, grease, fuel and paraffin wastes should be cleaned using chemical solvents. Damaged coatings, unstable surfaces and cracks must be repaired with suitable products. Depending on the surface condition after the repair, TEKNOBOND 660 1K should be applied after priming with a suitable primer.
Before applying the product, mix with a suitable mixer for 2-3 minutes at 300 rpm. TEKNOBOND 660 is applied in 2 coats with 1K brush or roller. Do not wait more than 24 hours between coats.
Application Notes / Restrictions
• Foreign materials should not be added.
• Avoid application in very humid and / or very hot weather.
• Direct sunlight, severe wind, high temperatures (above + 35°C) after application and frost protection. Before the product is fully cured and hardened, cleaning should be done.
• lmmediately after application, the equipment should be cleaned with TEKNO Thinner before it hardens.
• After hardening the product must be cleaned by mechanical methods.