CATEGORIES
SHEETS CAN DOWNLOAD HERE TSE DOCUMENT
DID YOU SEE? CE DOCUMENT
DID YOU SEE? OUR CATALOG YOU CAN
DOWNLOAD AS PDF
- Tile Adhesives and Joint Fillers Fuga
- Repair Mortars and Grouts
- Thermal Insulation Products
- Industrial Flooring Products
- Granito Microbeton
- Tekno Stone Carpet
- Restoration Products
- Waterproofing Products
- Concrete Admixtures
- Construction Reinforcement Products
- Construction Chemicals General List
SHEETS CAN DOWNLOAD HERE TSE DOCUMENT
DID YOU SEE? CE DOCUMENT
DID YOU SEE? OUR CATALOG YOU CAN
DOWNLOAD AS PDF
Teknomer 205 Cement and Acrylic Based, Two Component, Full Fle
Cement and Acrylic Based, Two Component, Full Flexible Waterproofing Material
CE Document
It is a two component, full flexible waterproofing material consisting of a combination of liquid polymers and special additives.
Areas of Usage
• In concrete and cement mortars and plastered surfaces in indoor and outdoor environments, as waterproofing,
• For curtain and wall insulation,
• Concrete is made in non-moving areas,
• For wet volume waterproofing,
• Water storage, swimming and ornamental pools,
• Wet spaces such as bathroom, wc, balcony,
• It is used in engineering constructions such as metro, tunnel, dam, highway.
Areas of Usage Benefits
• Can be used indoors and outdoors. When applied in outdoors, it is necessary to cover the floor.
• Drinking water is suitable for the theme.
• It does not shrink or crack.
• It is suitable for horizontal and vertical applications.
• It does not contain corrosive and toxic substances and can be used in drinking water tanks.
Application lnstructions
The surfaces must be clean, smooth, solid, free from any antiadhesive substance such as dust, oil, dirt, rust, mold oil, detergent and waste. lf there is segregation in concrete, broken and loose parts should be removed. lf there is crack, hollow on the floor or wall to be applied, it should be repaired with appropriate TEKNOREP repair mortars. TEKNOMER 205 should be applied 3-4 days later. Make sure that the slab or concrete is thrown in the direction of the water stream. The correct control of the curve is made in the following way. Beginning from the beginning to the gauge, put a scale on it. lf it is determined that there is no inclination or reverse slope in the control result, the application should not be started and the direction of the water flow should be adjusted by performing concrete and slab treatment. lf necessary, additional screed or concrete must be poured. lf the surface to be insulated is dry, it should be made ready for application by ensuring that it becomes wet and saturated with water. Tapered corners and edges should be chamfered with TEKNOREP thick repair mortar. TEKNOMER Champer Tapes should be applied to all the corners before ceramic tiles on wet floors and balconies.
After TEKNOMER 205 is thoroughly mixed and rested, the water is applied to the saturated surface with the help of a brush and trowel without losing its moisture. Following the first coat, second coat is applied in the perpendicular direction of the first coat. lf application is made on screed, flexible waterproofing files should be used between floors. Waiting time between floors; After the application of the 1 st coat, it can be applied to the other floors when there is no trace on the fingers.
The liquid B component of TEKNOMER 205 is first poured into a clean container which is free from all sorts of substances that prevent adhesion. The compound TEKNOMER 205 A in powder form is then poured slowly. The product is mixed with a low speed mixer until a homogeneous mixture without lumps is obtained. Mixing time should be at least 5 minutes, the mortar obtained at the end of the process should be rested for 3 minutes and mixed again until it becomes homogenous for 2 minutes.
• For curtain and wall insulation,
• Concrete is made in non-moving areas,
• For wet volume waterproofing,
• Water storage, swimming and ornamental pools,
• Wet spaces such as bathroom, wc, balcony,
• It is used in engineering constructions such as metro, tunnel, dam, highway.
Areas of Usage Benefits
• Can be used indoors and outdoors. When applied in outdoors, it is necessary to cover the floor.
• Drinking water is suitable for the theme.
• It does not shrink or crack.
• It is suitable for horizontal and vertical applications.
• It does not contain corrosive and toxic substances and can be used in drinking water tanks.
Application lnstructions
The surfaces must be clean, smooth, solid, free from any antiadhesive substance such as dust, oil, dirt, rust, mold oil, detergent and waste. lf there is segregation in concrete, broken and loose parts should be removed. lf there is crack, hollow on the floor or wall to be applied, it should be repaired with appropriate TEKNOREP repair mortars. TEKNOMER 205 should be applied 3-4 days later. Make sure that the slab or concrete is thrown in the direction of the water stream. The correct control of the curve is made in the following way. Beginning from the beginning to the gauge, put a scale on it. lf it is determined that there is no inclination or reverse slope in the control result, the application should not be started and the direction of the water flow should be adjusted by performing concrete and slab treatment. lf necessary, additional screed or concrete must be poured. lf the surface to be insulated is dry, it should be made ready for application by ensuring that it becomes wet and saturated with water. Tapered corners and edges should be chamfered with TEKNOREP thick repair mortar. TEKNOMER Champer Tapes should be applied to all the corners before ceramic tiles on wet floors and balconies.
After TEKNOMER 205 is thoroughly mixed and rested, the water is applied to the saturated surface with the help of a brush and trowel without losing its moisture. Following the first coat, second coat is applied in the perpendicular direction of the first coat. lf application is made on screed, flexible waterproofing files should be used between floors. Waiting time between floors; After the application of the 1 st coat, it can be applied to the other floors when there is no trace on the fingers.
The liquid B component of TEKNOMER 205 is first poured into a clean container which is free from all sorts of substances that prevent adhesion. The compound TEKNOMER 205 A in powder form is then poured slowly. The product is mixed with a low speed mixer until a homogeneous mixture without lumps is obtained. Mixing time should be at least 5 minutes, the mortar obtained at the end of the process should be rested for 3 minutes and mixed again until it becomes homogenous for 2 minutes.