Waterproofing Products

  TDS Technical Document Sheet   

  CE Document   

Product Description

One component, polyurethane based, high quality, liquid waterproofing material which cures by reacting with the moisture in the air. Because of its high quality, it keeps its elastic structure. it is ready to use.

Areas of Usage
• it can be used safely as water protection for;
• Corrosion in terraces, roofs, balconies and creek gutters,
• Wet areas undertiles, flowerpots, foundation and foundation curtain walls,
• Corrosion in concrete structures,
• Exterior parts ofthe buildings.
• Wooden and sheet metal type applic ations.
• Preliminarytesting is recommended.

Features and Benefits
• it is easy to apply (by aroller ora brush ora spray machine)
• it keeps its elasticity even at low temperatures.
• it has high frost resistance
• Excellent adhesion even on difficult surfaces.
• Can be applied seamlessly.
• Keeps its characteristic properties at (-40 °C / +80°C)
• it has the feature of creating crack bridge.
• Accumulation is water resistant

Application lnstructions
Surface Quality: AII Surfaces must be clean, dry, smooth, free from grease, oil, dirt and rust : Old loose coatings, dirt, fats, oils, organic substances and dust need to be removed by a grinding machine. Possible surface irregularities need to be smoothened. Any loose surface pieces and grinding dust need to be thoroughly removed. Do not wash the surface with water. Damaged surfaces should be repaired with TEKNOREP repair mortar. Wait for 3 or 4 days to applyTEKNOMER
600 ı K afteryou repaired the damage parts with TEKNOREP.

Surface Preparation: lf there is dilatation, it is necessary to isolate the dilatation by using Teknomer Chamfer bands and TEKNOMER 400 D before applying TEKNOMER 600 ı K. lfyou postpone it later,
isolating the dilatation will cost more and it will be more difficult. AII outlets and gutters, strainers should be insulated using chamfer bands. The surface must be dry. There mustn't be any puddle or ponding, Two component, epoxy based TEKNOBOND 300 should be applied asa primer to the concrete surface with a brush or roller as 0,200-0 ,400 kg/ m2 . Primer consumption varies according to the quality and absorbency of the concrete. The primer must be completely cured and hardened. Forwaterproofing application, wait at least 4 hours and maximum 24 hours.

Surface and AmbientTemperature: (+5 ° C)- (+3 5°C)

Application lnstructions
Mixing : PourTEKNOMER 6001Kin aclean pail orkeep it in itsown pail and Stiritwell before using it.

Equipments and Application Methods: After stiring TEKNOMER 600 1K, the product will be ready to be applied. Use ahard bristle brush ora spraying machineto aplly it on the surface. When you finish the first layer please wait until it completes its reaction . The second layer has to be applied perpendicular to the first layer. The waiting time between two layers should be minimum 1 hour. Please check if it is dry or not before applying the second layeron the first layer.
As it does not have any UV resistance, it should be protected from direct sun light by using thermal insulating board, geotextilefelt, guard plate and so on.

Consumption: Factors like temperature , application method and also the surface porosity might alter consumption. Depending on these factors the consumption is 1,20-1,50 kg/m 2

Cleaning: it should be protected from direct sun light, rain, strong wind, snow, frost and also high temperature (+35 ° C and more) afterthe application. Hands should be washed before it is hardened.

Cleaning of Equipment: lmmediately after application, before hardened, the skin which has contacted with the product should be washed with soap and water. Also the equipment should be cleaned with Tekno Thinner before hardened. After the product is hardened, it should be cleaned by mechanical methods.

Pot Life: Approximately 1 hour at +20°C
Cleanability Time: Approximately 1 hour at +20°C

Application Notes / Restrictions
• Foreign materialsshouldnot beadded.
• Apply it as two layers.
• Shouldn't beapplied while it is raining. Surface should be dry.
• Please do not add waterto dilutethe product.
• it should be protected from direct sun light, rain, strong wind, snow, frost and also high temperature until it is hardened.