Waterproofing Products

  TDS Technical Document Sheet   

  CE Document   

Product Description
TEKNOMER 600 1 K; one component, UV resistant, polyurethane based, high quality,
liquid waterproofing material which cures by reacting with the moisture in the air. Because of its
high quality, it keeps its elastic structure. it is ready to use.

Areas of Usage
it can be used safely as water protection for;
• Corrosion in terraces, roofs, balconies and creek gutters,
• Wet areas undertiles, flowerpots, foundation and foundation curtain walls,
• Corrosion in concrete structures,
• Exterior parts of the buildings.
• Wooden and sheet metal type applications.
Preliminary testing is recommended.

Features and Benefits
• it is easy to apply (by a roller or a brush or a spray machine)
• it keeps its elasticity even at low temperatures.
• it has high frost resistance
• Excellent ad hesi on even on difficult surfaces.
• Can be applied seamlessly.
• Keeps its characteristic properties at (-30°C / +90°C)
• it has the feature of creating crack bridge.
• Accumulation is water resi stant

Application lnstructions
Surface Quality: AII Surfaces must be clean, dry, smooth, free from grease, oil, dirt and rust: Old
loose coatings, dirt, fats, oils, organic substances and dust need to be removed by a grinding
machine. Possible surface irregularities need to be smoothened. Any loose surface pieces and
grinding dust need to be thoroughly removed. Do not wash the surface with water. Damaged
surfaces should be repaired with TEKNOREP repair mortar. Wait far 3 or 4 days to
applyTEKNOMER 6001 K U V after you repaired the damage parts with TEKNOREP.


Surface Preparation: lf there is dilatation, it is necessary to isolate the dilatation by using
Teknomer Chamfer bands andTEKNOMER 400 D before applying TEKNOMER 6001 K UV. lf you
postpone it later, isolating the dilatation will cost more and it will be more difficult. AII outlets and
gutters, strainers should be insulated using chamfer bands. The surface must be dry. There
mustn 't be any puddle or ponding, Two component, epoxy based TEKNOBOND 300 should be
applied as a primer to the concrete surface with a brush or roller as 0,200-0,400 kg/ m2. Prim er
consumption varies according to the quality and absorbency of the concrete. The primer must be
completely cured and hardened. For waterproofing application, wait at least 4 hours and maximum
24 hours.
Su rface and Am bient Tem perature: ( +5 °C)- ( +35 °C)
Application lnstructions:
Mixing: PourTEKNOMER6001 K U V in a clean pail or keep it in its own pail and stir it well before
using it.
Equipments and Application Methods: After stiring TEKNOMER 600 1 K UV, the product will be
ready to be applied. Use a hard bristle brush or a spraying machine to aplly it on the surface. When you
finish the first layer please wait until it completes its reaction. The second layer has to be
applied perpendicular to the first layer. The waiting time between two layers should be minimum 1
hour. Please check if it is dry or not before applying the second la yer on the first layer.
Consumption: Factors like temperature, application method and also the surface porosity might
alter consumption. Depending on thesefactors the consumption is 1 ,20-1 ,50 kg/m2
Cleaning: it should be protected from direct sun light, rain, strong wind, snow, frost and also high
temperature ( +35° C and more) after the application. Hands should be washed before it is hardened.
Cleaning of Equipment: lmmediately after application, before hardened, the skin which has
contacted with the product should be washed with soap and water. Also the equipment should be
cleaned with Tekno Thinner before hardened. After the product is hardened, it should be cleaned by
mechanical methods.
Pot Life: Approximately 1 hour at +20° C
CleanabilityTime: Approximately 1 hour at +20° C

Application Notes/ Restrictions
• Foreign materials should not be added.
• Apply it as two layers.
• Shouldn't be applied while it is raining. Surface should be dry.
• Please do not add water to dilutethe product.
• it should be protected from direct sun light, rain, strong wind, snow, frost and also high
temperature until it is hardened.