TDS Technical Document Sheet
CE Document
|
Product Description It is a single component, ready to use waterproofing material that is modified new generation hybrid resins,. Protects its elastic structure permanently, can be applied to moist surfaces, UV resistant, does not contain water and is 100% cured by reacting with air humidity.
Areas of Usage• Terrace, roof, balcony and creek,
• On cracks on the surface,
• On foundation and curtain walls,
• On the mantle surface cracks,
• Protected against water and corrosion in concrete structures,
• in building exterior,
• in ceramic waterproofing,
• in applications on wood and sheet metal surfaces,
Features and Benefits• it has the abilityto create a crack bridge,
• UV resistant,
• Provides excellent adhesion even on moist surfaces,
• Maintain elasticity even at low temperatures,
• Easy to apply (by roller or brush)
• Application can be done without priming,
• it has excellent adherence properties even on difficult surfaces,
• Completely applicable,
• it is resistant to watering in terraces and fences.
Features and Benefits• it has the abilityto create a crack bridge,
• UV resistant,
• Provides excellent adhesion even on moist surfaces,
• Maintain elasticity even at low temperatures,
• Easy to apply (by roller or brush)
• Application can be done without priming,
• it has excellent adherence properties even on difficult surfaces,
• Completely applicable,
• it is resistant to watering in terraces and fences,
Application lnstructionsThe surfaces must be clean, smooth, solid, free from any antiadhesive substance such as dust, oil, dirt, rust, mold oil, detergent and waste. lf there is segregation in concrete, it should be discarded and loose parts should be removed, weak parts should be removed. lf there is crack, hollow on the floor or wall to be applied, it should be repaired with appropriate TEKNOREP repair mortars. TEKNOMER 700 can be applied to the surface with brush and roller.
The TEKNOMER 700 is ready for use and can be removed from the packaging and used directly. it should be applied flat and using Special Roll (short pile roll). Application should be done in two coats and waiting for the previous coats. lf desired, it can be used as carrier glass fiber, reinforcement throughout the floors.
it must be protected after application against adverse weather conditions such as direct sunlight, high air temperature (above +35 °C), rain and frost. The product should be cleaned thoroughly with water and detergent before it is fully cured and hardened.
lmmediately after application, before hardened, the equipment should be cleaned with TEKNO Thinner. After the product is hardened, it should be cleaned by mechanical methods.