Waterproofing Products

  TDS Technical Document Sheet   

Product Description
Waterproofing membrane / overlay for indoor wet volume applications.

Areas of Usage
• lndoors / in residential areas, wet areas (bath room, balcony, terrace, roof, ete.) floor and wall area applications, expansion joints and other joint sealants.
• Outdoor / Commercial areas.

Application lnstructions
• Application before application / Floor is strong, carrier, dust , dirt and oil, grease, rust and paraffin
wax.
• The waterproofing membrane / covering is cut to the extent that it completely covers the floor / wall and provides insulation.
• Ceramic adhesive (C2 class Flex adhesive) is prepared according to the manufacturer's instructions.
• The use ofa 4 mm x 4 mm threaded comb is recommended for the application of the adhesive. (6x6 mm comb should be used for ceramic adhesive application in external / commercial membrane applications.)
• The insulation membrane / cover is applied easily on the wall and the floor on the ceramic adhesive. From the standpoint of ease of application, application from the top down is recommended.
• it can be applied by overlapping membrane / coverings in indoor and residential applications. The system is locked by applying liquid membranes or sealing materials in the overlay areas (at least 5 cm).
• The excess ceramic adhesive, air bubbles and pots remaining underneath the membrane / cover surface are smoothened with a flat trowel .
• in the application of insulation to outdoor and open spaces, application should be made by adding membranes to the tip, (no overlaying should be done).
• The excess ceramic adhesive, air bubble s and pots remaining underneath the membrane / cover surface are smoothened with a flat trowel.
• After application of the membrane to the tip, waterproofing band should be applied at the junctions of the membranes.
• lmmediately following the application of the waterproofing membrane / cover, the ceramic builder can be applied on the membrane and the ceramic coating can be started.
• After ceramic application, the wall and floor joints are filled with suitable sealing material.