Cement based, ceramic and tile adhesive with high bonding strength and ability to work far a long time.Areas of Usage
• It is used in vertical and horizontal applications,
• In houses, shopping malls, hospitals,
• Far adhering materials such as small and medium sized tiles, ceramics with a water absorption rate of over 3%
Features and Benefits
• Easy to prepare and apply.
• It has high adhesion properties.
• It does not slip in vertical applications.
• It saves time and labor.
Application lnstructions
Surface Quality: The surfaces must be clean, smooth, solid, free from any antiadhesive substance such as dust, oil, dirt, rust, mold oil, detergent and waste. The surfaces should be level, weak parts should be removed. lf there is crack, hollow on the floor or wall to be applied, it should be repaired with appropriate TEKNOREP repair mortars. Teknofay application should be started 3-4 days later.
Surface Preparation: lf applied on marble, ceramics and pellets, the surfaces should be roughened. Concrete floor should be damp but water should not be debris. it is recommended to use lining on surfaces such as gaseous concrete, exposed concrete, gypsum board.
Mixing: 6,8- 7,2 it clean, clear water received from normal ambient temperature into a clean container which is free from all kinds of materials which prevent adhesion. TEKNOREP 450 in 25 kg bag as powder is poured into a container filled with water. The product is mixed with a low speed mixer until a homogeneous mixture without lumps is obtained. The mortar obtained at the end of the process should be rested far 3 minutes and mixed again until it becomes homogenous far 2 minutes.
