Surface Preparation: Before making tiles on the tiles or glazing on the glazed tile, the soil surveys should be done well. First, the old glazed tile or the stability of the tiles are checked. It should be checked whether hammer and trowel and tiles or glazed tiles hold the floor.
The hollow parts should be repaired, the playing ceramics should be glued again and the gaps filled with the same material as before. The floor should be cleaned thoroughly with water so that no dust remains.
Substrate Quality: Surfaces must be clean, smooth, stable and at the same time, weak parts must be removed and damaged surfaces should be repaired with TEKNOREP. The surface must be free of oil, dirt and rust. The surfaces of tiles or ceramics should be roughened.
Mixing: In a clean container which is free from all kinds of sticking materials, it is taken from normal ambient temperature to 6.0 - 7.5 lt. clean, clear water. Teknofay FLEX, which is in a 25 kg bag in powder form, is emptied into the container filled with water. It is mixed with a low speed mixer with a ceramic stirrer tip until a homogenous mixture without lump is obtained. Mixing time is minimum 5 min. should be. Mortar obtained at the end of the process 3 min. 2 minutes. should be mixed until homogeneous.
New ceramics should be adhered to the floor with Teknofay FLEX and should be allowed to set for 24-48 hours.
Teknoderz is applied to the joint cavities by means of rubber trowel in horizontal and vertical applications.
